The Melbourne Cricket Ground (MCG) or the ‘G’ as it has become affectionately known, has an important project deadline.
The national sports icon is currently undergoing a redevelopment in preparation for the 2006 Commonwealth Games to be held in March.
When complete, the ‘G’ will boast three impressive glazed entry structures over the Ponsford Gate, the Members Entrance and the Olympic Stand Entrance, each with its own network of high tensile stainless steel members.
The project is a collaboration between Ronstan’s architectural division and steel contractor, Materials Fabrication.
ASSDA member, and Australia’s own world leader in tension structures, Ronstan Architectural Rigging Systems, has been intimately involved in the supply of stainless steel tension rods on the project.
Ronstan looked at the loads required and selected the material grade for the specific tensile characteristics. This allows for the optimal efficiency of the tendon in transferring the load, a key requirement in lightweight tensile architecture.
In this case the ‘G’ structures included 600 tendons with adjustable fork ends manufactured from approximately two kilometres of 19mm grade 316L stainless steel bar.
These were polished to a No. 7 finish and passivated to achieve the required aesthetics and longevity.
“The challenge was to compliment a great product with the right mix of product support,” said Rowan Murray, General Manager of Ronstan Architectural Rigging Systems.
Images courtesy of John Gollings.
This article featured in Australian Stainless magazine - Issue 32, Winter 2005.
