Australian Stainless Blog

Stainless Steel Fabrication

Common Traps to Avoid


Posted 1 April 2006

Errors in stainless steel fabrication can be expensive and difficult to resolve. So a 'Get it right the first time' approach to stainless fabrication is necessary to gain the best result. Check the ASSDA website regularly for a local Stainless Steel Specialist.

Gold Coast's Kirra Point: Looking Great Six Years On

Gold Coast's Kirra Point: Looking Great Six Years On

When the Gold Coast City Council was seeking a stable and visually stunning medium for use on their Kirra Point board walk project in 1999, they looked no further than stainless steel and after six years in service, it still looks great.

 

Food Specification Improves Fabrication Practices

Food Specification Improves Fabrication Practices

Hygiene and the 'cleanability' of equipment used in the production of food are paramount. The widespread use of stainless steel equipment in the food industry goes some way towards ensuring these criteria are met - but the assurances provided by stainless steel are only as good as the fabrication quality of the equipment.

No. 4: The workhorse finish

No. 4: The workhorse finish

No. 4 finish stainless steel is the workhorse of the light fabrication industry. The easiest of the finishes to maintain, No 4 finish is used for work surfaces, handrails and where appearance is important.

Design Software Vs. Back to Basics

Design Software Vs. Back to Basics

New technology to assist with accurate design is always welcome, but it is important that users proceed with caution when using international design tools.

There is no doubt that designing with stainless steel offers endless opportunities for architects and engineers to be both creative and functional. At the same time, it is critical that the design is right for the application.

Big Fish Swimming in a Small Pond

Big Fish Swimming in a Small Pond

Northern Territorians know their barramundi, which is why ASSDA Accredited Fabricator Northern Stainless had to get it absolutely right when they reeled in the contract to design and fabricate this 1030mm specimen.

Smooth and Corrosion Resistant Surfaces from the Mill

Smooth and Corrosion Resistant Surfaces from the Mill

This article is the second in a series on common finishes. The first (Winter edition 2006) dealt with the abraded 'No. 4' (2K, 2J) finish. This article looks at 2D, 2B and BA: smooth and corrosion resistant surfaces produced at the steel mill. Subsequent articles in this series will cover mirror polished (No. 8 or 2P) and profiled and hot rolled (No. 1) finishes.

Stainless Steel Launches its Artistic Merit

Stainless Steel Launches its Artistic Merit

Internationally renowned, Yackandandah based sculptor Benjamin Gilbert was commissioned to create a series of sculptures for Melbourne’s Commonwealth Games.  Extending six metres in the air, the exhibits laid testament to three different stages of a pole–volter whilst displaying the versatility and artistic merit of stainless steel.